Effective hydraulic clamping

It is the latesest product in the workshop of M-MOOS Ltd. This series of lathes series "heavy duty" is completely assembled in the Czech Republic. This is a really solid and heavy CNC lathes, which are designed according to the latest trends in metal and same time, reflect the rich experience of M-MOOS Ltd. output of conventional and CNC lathes.

The CNC lathe is available with Fanuc control system, SIMENS or Haidenhain. It is designed for roughing and finishing large shaft and flange parts, the thread cutting, drilling, turning, cones and various shaped surfaces of revolution. The machine has a horizontal bed, solid construction, guide surfaces are hardened bed and brushed protiplochy on longitudinal slide are lined with sliding mass Turcite B due to the removal of hitch moves at low feeds.

Lathe is designed as standard with a Fanuc spindle drive (Siemens) a22/26 kW, which allows the spindle positioned in a certain position. Work efficiency is enhanced by advanced gearing mechanism that allows automatic changes gears without stopping labor operations. Customized machine can be equipped with 4-position tool post or 8-position tool post. 8 positional horizontal cutter block is offered as an optional accessory. The basic equipment is a machine equipped with a chip conveyor

All major parts, such as bed, slide, headstock are iron castings, which are internally reinforced to resist bending and damped vibration generated during machining.

The castings are hardened to 50-52 HRC, which provides a very high accuracy machining. Bed, slide, headstock, pedestal and other parts are cast in a mold with resin sand

Motion control

Box way is based on exactly grindinded surfaces with a guiding direction of box-type way (right-angled lines). Sliding surfaces of the working table, cross slide and spindle are lined sliding mass Turcite B.

The machine is equipped with an automatic central lubrication system that provides powerful automatic lubrication ball screw and sliding surfaces and a separate lubrication system for components headstock.

Precision of ball srew, their anchorages and limit tensioning nut ball screws have a significant impact on positioning accuracy in each axis.

Therefore, the machines are equipped with standard three-C3 stepped on the ball screws and precision IT5 IT 6th Ball screws are anchored at both ends. Their parallel to the guiding surfaces is controlled during assembly with a laser.